Hatch under tiles Push Mega Alyum 2.0 650*800
The minimum width of the tile joint is 2 mm. When laying material with a thickness of more than 10 mm, it is necessary to cut down the edges of the facing material at an angle of 45 degrees.
Non-standard (custom) hatches - these are hatches of non-standard sizes, manufactured to order.
The hatch can be manufactured in almost any size, with an accuracy of +-2mm.
In the size table, non-standard hatches are highlighted in white or brown (if the hatch is double-leaf) colors.
Custom hatches are put into production only after pre-production.
The minimum prepayment amount is 50% of the order value.
Custom-made products cannot be returned or exchanged!
Standard hatchesare included in the stock program and are usually available in our warehouse.
In the size table, such hatches are highlighted in orange.
These hatches are subject to exchange and return and do not require advance payment.
Hatch under tiles Push Mega Alyum 2.0
Ability to adjust gaps horizontally and vertically
Opens and closes by hand pressing
Provides additional structural rigidity
Tile chips are excluded. Opening and closing the hatch due to given trajectory
General parameters
ATTENTION! Non-standard products are put into production only after prepayment!
Vertically
Anti sagging system
Very easy opening;
Large size
Along the frame (Antiskol)
Special fastening elements
The minimum width of the tile joint is 2 mm. When laying material with a thickness of more than 10 mm, it is necessary to cut down the edges of the facing material at an angle of 45 degrees.
Размеры
Box depth: 60 mm
Height: 730 mm
Height: 800 mm
Height: 800 mm;
Depth: 76 mm
The error in the production of hatches may be ±2 mm.
The manufacturer may change the design, appearance and technical characteristics of the model without further notice.